27
M1M 30 POWER METER USER MANUAL
7.Configuration (CONF)
When the user goes to the CONF section, Icon will be displayed.
When entering the CONF section, in order to change any configuration of the device, it is mandatory
to enter the password. The password is valid as soon as the user remains in the Configuration section
and for max. 5 minutes of idle. After quitting the Configuration section, it is needed to enter again the
password.
In case of wrong entering of the password for three times in a row, user will have to wait for 5 minutes
until he can enter the password once again.
In order to read only the configurations, it is possible to simultaneously press “Enter” and “Up” buttons.
After the user enters the password to unlock the device, Icon will be displayed and icon will
disappear.
CONF includes the following menus:
Menu Description
UNIT Settings related to the device itself
INSTL Settings related to the installation conditions
HIST Settings related to Historicals functionalities, stored on the flash memory
I/O Definition of I/O type of the M1M version
ALARM Definition of alarm conditions
COMM Settings related to the embedded communication protocols of the M1M version
To Next Page
Loading...
Need help?
General
