Operation Manual / TPS44-F.. - TPS61-F..
5 Maintenance / 5.4 Cleaning components mechanically
© Copyright 2020 . All rights reserved. HZTL2412_EN Rev.G March 2020
5.4 Cleaning components mechanically
5.4.1 Introduction
CAUTION
Choosing cleaning tools
Turbocharger components are sensitive to mechanical damage. The
use of needle guns or other impact tools, for example, damages the
components. Depending on the specification, nozzle rings and turbine
casings have protective coatings, which can also be damaged.
u Only use soft tools such as cloths, brushes or wire brushes.
u In the event of heavy contamination, the cleaning methods that have
been described such as soaking can be repeated until a satisfactory
result has been achieved.
u Dispose of dirty water and cleaning agents in an environmentally
compatible manner, professionally and in accordance with valid local
regulations.
NOTICE
Disassembly and assembly
The disassembly and assembly of the components is described in
chapter Disassembly and assembly.
Page 56 / 113
To Next Page
Loading...
Need help?
General
