2-55 System Utilities
LAN MAC Address Modify SOP
1. Extract “LAN EEPROM Utility” folder onto your desktop.
2. Find and execute “DisableUAC.reg”. Click Yes and OK. Then restart your computer.
Figure 2-100. Execute “DisableUAC.reg”
3. After restart, find and execute “WINPG64.BAT”. It will automatically update your MAC address.
Then press any key to check if the MAC address has already been updated.
Figure 2-101. Execute “WINPG64.BAT”
To Next Page
Loading...
Need help?
General
