EasyManuals Logo

Acer Aspire 5610 Series Service Guide

Acer Aspire 5610 Series
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
70 Chapter 4
Check the Power Adapter
Unplug the power adapter cable from the computer and measure the output voltage at the plug of the power
adapter cable. See the following figure
1. If the voltage is not correct, replace the power adapter.
2. If the voltage is within the range, do the following:
T Replace the System board.
T If the problem is not corrected, see “Undetermined Problems” on page 84.
T If the voltage is not correct, go to the next step.
NOTE: An audible noise from the power adapter does not always indicate a defect.
3. If the power-on indicator does not light up, check the power cord of the power adapter for correct
continuity and installation.
4. If the operational charge does not work, see “Check the Battery Pack” on page 71.
Pin 1: +19 to +20.5V
Pin 2: 0V, Ground

Table of Contents

Other manuals for Acer Aspire 5610 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acer Aspire 5610 Series and is the answer not in the manual?

Acer Aspire 5610 Series Specifications

General IconGeneral
GraphicsIntel GMA 950
Optical DriveDVD-Super Multi double-layer drive
Wireless802.11a/b/g
Battery6-cell Li-ion
ChipsetMobile Intel 945GM Express
Weight2.8 kg
RAMUp to 4 GB DDR2
Storage120 GB HDD
Display15.4" WXGA (1280 x 800)
Operating SystemWindows XP Home
LAN10/100 Mbps Ethernet
Ports4 x USB 2.0, VGA, S-video, headphone/microphone jacks, Ethernet, modem
ProcessorIntel Core Duo / Core Solo

Related product manuals