84
Thermal Module Installation
＋IMPORTANT:
Apply approved thermal grease and make sure all heat pads are in place
before replacing module.
The following thermal grease types are approved for use:
1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab and
Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply small amount of thermal grease to center of CPU (D). (Figure 3-32)
NOTE:
Force used during installation of thermal module is sufficient to spread grease over CPU
top.
Figure 3-32. CPU Grease
3. Align and install thermal module (A) to mainboard screw holes. (Figure 3-31)
4. Secure captive screws (B/1 - B/4) in numerical order from one (1) to four (4) to
mainboard.
5. Install and secure screws (C) to thermal module on main frame.
6. Install EMI top.
ID Size Quantity Screw Type
C M3.0x5.0 1
D
To Next Page
Loading...
Need help?
General