6
IVEDITI 1707 - 4880981_01
Volt
xxxxxxxxxx
example of packaging label
ATTENTION: Tampering,
removal, the lack of the
identification plate does
not allow the product to
be safely identified and will
complicate any installation
or maintenance operations.
technical plate
The VED_I fan coils can be identified through:
PACKAGING LABEL
Located on the packaging, it indicates the product identification data.
TECHNICAL PLATE
Located inside the unit, it indicates the identification and technical data of
the product.
PRODUCT IDENTIFICATION
packaging label
example of technical plate
TRANSPORT
data plate to transport the unit safely.
Take the following measures during
transport:
• The unit and the accessories must
not undergo violent impacts in order
-
ture and of the internal components;
•
any accessories must be protected in
order to prevent impacts, for this rea-
son they must be properly secured on
any other means that prevent their
movement;
• during transport and storage, the
unit and the accessories must always
be protected against bad weather.
VERIFICATIONS UPON RECEPTION
Visually check the unit upon recep-
• the order corresponds with what is
indicated in the transport documents;
• packaging is intact;
• the unit is intact;
• all the components have been pro-
vided.
Indicate any damage or missing com-
ponents on the transport document.
HANDLING
ATTENTION! : Wear proper personal
Fully remove the unit and the com-
ponents from the packaging before
INSTALLATION
Read this sheet carefully; the execu-
-
ing to Standards in force on this sub-
-
paragraphs. The paragraphs follow
a chronological order to facilitate in-
the components required to com-
Aermec accessories are supplied
complete with a manual for installa-
Aermec accessories are designed to
be integrated into Aermec units both
units are designed to
To Next Page
Loading...
Need help?
General
