IVEDITI 1707 - 4880981_01
• Fan coil for vertical wall mounted instal-
lation and horizontal suspended ceiling
installation
• Versions for 2-pipe systems with main,
standard or larger coil.
• Versions for 4-pipe systems with also
heating, standard or larger coil.
• Coil with low pressure drops.
• Reversible connections on site.
• Wide range of accessories to connect the
fan coil to the air ducting.
• It requires an external control device
• Set up for insertion in the VMF system.
• Wide range of controls and accessories.
• Wide possibility to have different useful
static pressure.
• Motorised fan with brushless motor and
dedicated inverter.
• Centrifugal fans with blades designed for
low sound emissions
• Filter with G3 filtration class.
• Intake air filter, easy to remove for peri-
odical cleaning.
• 3-way and 4-connection valve acces-
sories.
• 2-way valve accessories for systems with
variable water flow rate
• Internal insulation class 1.
• Full compliance with accident-prevention
standards.
• Easy installation and maintenance
• Flow flange obtained directly on the unit.
Example of vertical installation Example of horizontal installation
VED 030 I
VED 040 I
VED 130 I
VED 140 I
VED 230 I
VED 240 I
VED 330 I
VED 340 I
VED 530 I
VED 540 I
VED 730 I
VED 740 I
VED 030 I
VED 130 I
VED 230 I
VED 330 I
VED 532 I
VED 541 I
VED 732 I
VED 741 I
DESCRIPTION OF THE UNIT
AIM OF THE VED FAN COILS WITH INVERTER MOTORISED FAN
The fan coil is a terminal used to treat air, both during winter and summer. The VED_I fan coils have been designed to meet any require-
ment in ducted systems.
In particular, the fact that the unit can be integrated in the VMF system allows you to control the individual fan coil with accessories up
to the management of the VED_I inserted in complex networks of fan coils and relative accessories.
SIZES AVAILABLE
The VED_I fan coils are available for:
To Next Page
Loading...
Need help?
General
