xi 34980A Service Guide
Instrument Rack Mounting
Using the optional Agilent Y1130A Rack Mount Kit, you can mount the 34980A in a
standard 19-inch rack cabinet. This kit includes rack mount brackets and associated
hardware required to forward or reverse mount the instrument in the rack cabinet.
• For forward rack mounting (34980A front panel facing the front of
the cabinet), use the Agilent standard rack mount kit (part number 5063-9214). For
Agilent rack cabinets, use the E3663A Basic Rail Kit (sold separately).
• For reverse rack mounting (34980A rear panel facing the front of
the cabinet), use the longer brackets (see figure below) with the hardware for the
standard rack mount kit. For Agilent rack cabinets, use the E3664AC Third Party
Rail Kit (sold separately).
Reverse Rack Mount Orientation (longer brackets used)
To Next Page
Loading...
Need help?
General
