1-8
Installing the 86100C
Step 4. Connect the keyboard and mouse
Step 4. Connect the keyboard and mouse
NOTE To complete the installation, you must connect the keyboard to the 86100C.
Since the 86100C has a touch screen, the use of a mouse is optional.
1 Connect the supplied USB keyboard to either of two USB ports located on the
rear panel. Most users find it more convenient to connect the keyboard to the
rear-panel leaving the front-panel USB port available for a USB flash drive.
Rear-panel PS/2 connectors are also provided in case you want to use a PS/2
keyboard or pointing device. Older AT style (DIN 5) keyboards will require an
adapter that is available at many computer stores.
Figure 1-3. Accessory Connections
2 Connect the optional mouse to any available USB port that is located on the
instrument.
To Next Page
Loading...
Need help?
General
