22 U1241B/U1242B User’s and Service Guide
2 Features and Functions
3 Press (Log) for more than one second to exit this mode.
Figure 2-6 Manual logging display
Interval Logging
To enable the Interval (automatic) logging function, select the Interval log-
ging by defining the interval setting in Setup mode.
1 Press (Log) for more than one second to store the present value
and function on primary display to memory.
2 The reading automatically logs into the memory in every interval as
preset in Setup mode, see Figure 2- 7.
3 Press (Log) for more than one second to exit this mode.
Maximum data that can be stored is 100 entries. When the 100 entries are filled, FUL
annunciator is indicated on the secondary display.
When interval (automatic) logging is enabled, all keypad operation is disabled, except for
Log function.
To Next Page
Loading...
Need help?
General
