Performance Tests and Calibration 5
U1241B/U1242B User’s and Service Guide 37
Adjustment is Recommended
Specifications are only guaranteed within the period stated from the last
adjustment. Agilent recommends that readjustment should be performed
during the calibration process for best performance. This will assure that
the U1241B/U1242B will remain within specification. This criteria for
re- adjustment provides the best long–term stability.
Performance data is measured during Performance Verification Tests and
does not guarantee the multimeter will operate within the test limits
unless the adjustment is performed.
Refer to Calibration Count to verify that all adjustments have been
performed.
To Next Page
Loading...
Need help?
General
