130 Rockwell Automation Publication 520-UM001G-EN-E - September 2014
Chapter 3 Programming and Parameters
Network Parameter Group
This group contains parameters for the network option card that is installed.
Refer to the network option card’s user manual for more information on the
available parameters.
Modified Parameter Group
This group contains parameters that have their values changed from the factory
default.
When a parameter has its default value changed, it is automatically added to this
group. When a parameter has its value changed back to the factory default, it is
automatically removed from this group.
Fault and Diagnostic Group
F604 [Fault 4 Code] Related Parameter(s): b007-b009
F605 [Fault 5 Code]
F606 [Fault 6 Code]
F607 [Fault 7 Code]
F608 [Fault 8 Code]
F609 [Fault 9 Code]
F610 [Fault10 Code]
A code that represents a drive fault. The codes appear in these parameters in the order they occur (b007 [Fault 1 Code] = the most recent fault). Repetitive faults are only recorded once.
Values Default: Read Only
Min/Max: F0/F127
Display: F0
F611 [Fault 1 Time-hr]
F613 [Fault 3 Time-hr]
F615 [Fault 5 Time-hr]
F612 [Fault 2 Time-hr] Related Parameter(s): d362
F614 [Fault 4 Time-hr]
F616 [Fault 6 Time-hr]
F618 [Fault 8 Time-hr]
F620 [Fault10 Time-hr]
PowerFlex 525 only.
F617 [Fault 7 Time-hr]
F619 [Fault 9 Time-hr]
Displays the value of d362
[Elapsed Time-hr] when the fault occurs.
Values Default: Read Only
Min/Max: 0/32767 hr
Display: 1 hr
F621 [Fault 1 Time-min]
F623 [Fault 3 Time-min]
F625 [Fault 5 Time-min]
F622 [Fault 2 Time-min] Related Parameter(s): d363
F624 [Fault 4 Time-min]
F626 [Fault 6 Time-min]
F628 [Fault 8 Time-min]
F630 [Fault10 Time-min]
PowerFlex 525 only.
F627 [Fault 7 Time-min]
F629 [Fault 9 Time-min]
Displays the value of d363
[Elapsed Time-min] when the fault occurs.
Values Default: Read Only
Min/Max: 0.0/320.0 min
Display: 0.1 min
To Next Page
Loading...
Need help?
General
