Rockwell Automation Publication 6000-TG100A-EN-P - September 2020 11
Chapter 1
Before You Begin Tests, Maintenance, or Repairs
Read the information in this chapter before you begin tests, maintenance, or
repairs on drive components.
Product Advisories Read the following precautions before you begin to test components, perform
maintenance, or repair the drive.
Qualified Personnel
Topic Page
Product Advisories 11
Safety Considerations 13
Remove Power from the System 13
Commonly Used Tools 14
Fastener Torque Sequences 15
Torque Requirements 16
IMPORTANT
Once the product is connected to a power supply, always verify that
system power is not present before performing any work on the product.
See safety-related practices that are contained in publication NFPA 70E,
Standard for Electrical Safety in the Work Place.
ATTENTION: Only qualified personnel familiar with PowerFlex 6000T
products and associated machinery should plan or implement the
installation, startup, and subsequent maintenance of the system. Failure to
comply can result in personal injury and/or equipment damage.
ATTENTION: These tasks require persons skilled in this type of detailed
work. Read and understand this manual thoroughly before commencing.
Contact Rockwell Automation with any questions or for clarification.
To Next Page
Loading...
Need help?
General
