26 Rockwell Automation Publication 6000-TG100A-EN-P - September 2020
Chapter 2 Preventative Maintenance and Component Replacement
Prepare Final Report
The Rockwell Automation service engineer will provide a maintenance report
to the customer based on the outcome of the maintenance work. All steps in
the preventive maintenance process will be recorded in detail in the report and
will identify changes that are made.
The final report includes:
• A complete copy of the Preventive Maintenance checklist.
• Problems that are found during the investigation process and
rectification recommendations.
• Adjustments and measurements during maintenance (including
mechanical adjustment, connection status, voltage reading, vibration
test results, parameters, and so on).
This information will be sent to the PowerFlex 6000 Technical Support and
Product Support for the latest on-site information for future maintenance and
technical support.
To Next Page
Loading...
Need help?
General
