Rockwell Automation Publication 750-QS001A-EN-P - March 2015 5
Introduction
This Quick Start publication is designed to guide you through the 6 BASIC STEPS that are required to start up your
PowerFlex 750-Series AC drive for the first time for simple applications.
Who Should Use This Manual
This manual is intended for qualified personnel.
• You must understand the hazards that are associated with electromechanical equipment installations.
• You must understand and follow all applicable local, national, and/or international electrical codes.
• You must be able to program and operate Adjustable Frequency AC Drive devices.
• You must have an understanding of the parameter settings and functions.
Equipment
The following equipment requirements apply to the use of this publication.
• The drive is a PowerFlex 750-Series in a standalone installation.
• No load sharing or multiple motors on a single drive.
• The drive is equipped with either a PowerFlex 20-HIM-A6 or a 20-HIM-C6S Human Interface Module (HIM).
• The drive is used with an induction motor type only.
Supported Applications
This publication is intended for use on typical applications such as fans, pumps, compressors, and conveyors.
Installation
The content of this manual assumes that the drive is installed according to Rockwell Automation guidelines and includes
the following.
• The drive installation meets mechanical requirements for drive orientation, cooling airflow, and mounting hardware.
• The drive installation meets environmental requirements for surrounding air temperature, ambient atmosphere, and
the
enclosure rating.
• The drive installation meets electrical requirements for AC supply, motor sizing, wiring and grounding, and
ove
rload and short circuit protection.
• The drive installation is compliant with all applicable local, national, and international codes, standards, and
re
qu
irements.
PowerFlex 750-Series drives handle multiple types of motors and applications globally that are not covered in this manual.
To Next Page
Loading...
Need help?
General
