AMX NX-1200 Hardware Reference Manual

Installation of the USB Gadget Serial Driver for Windows 8.x – 32/64-Bit Operating Systems
37
Hardware Reference Guide - NX-Series NetLinx Integrated Controllers
Installation of the USB Gadget Serial Driver for
Windows 8.x – 32/64-Bit Operating Systems
Overview
With AMX's NX-Series Controllers, the USB Gadget Serial driver must be installed differently for users running the Windows 8.X
32/64 bit Operating Systems. This driver is necessary for users connecting to the USB programming port on the front panel of the
NX-Series Controllers.
Manually installing this driver require you to "Disable Driver Signature Verification" when installing unsigned drivers. The
procedures below describe how to disable driver signature verification and how to find the required Gadget Serial driver to install.
Disabling Driver Signature Verification Procedures
Perform the following steps to disable Driver Signature Verification Procedures.
1. Press the Win + C keyboard combination to bring up the Charms Bar, then click on the Settings Charm.
FIG. 40 displays the Charms bar.
FIG. 40
Charms Bar
2. Click on the Change PC settings link.
FIG. 41 displays the available options.
FIG. 41
Change PC Settings

AMX NX-1200 Specifications

General

Brand	AMX
Model	NX-1200
Category	Controller
Language	English