CONFIDENTIAL
30
30” BUILT-IN REFRIGERATOR / REVISION NUMBER: 00
10.1. E0 Freezer Air Sensor Error
E0:
Freezer
AIR
SENSOR
ERROR
Check the cables connected to the pins
number 3 and 4 of the control board
sensor socket (KN2)
If the cables are came out, correct
them, turn on the fridge and check
i
display?
Dismantle the KN2 socket from the
control board. Measure the3 sensor
resistance from pins number 3 and 4 of
the socket and check if it is between 5K
and 200K
Is the value
appropriate?
Change the control board.
Change the faulty sensor by looking at
the sensor change SUF
To Next Page
Loading...
Need help?
General
