CONFIDENTIAL
31
30” BUILT-IN REFRIGERATOR / REVISION NUMBER: 00
10.2. E1 Freezer Evaporator Sensor Error
E1:
Freezer
Evaporator
Sensor
Error
Check the cables connected to the pins
number 5 and 6 of the contr
ol board
sensor socket (KN2)
If the cables are came out, correct
them, turn on the fridge and check
i
Is there an error on the
display?
Dismantle the KN2 socket from the
control board. Measure the 5 sensor
resistance from pins number
5 and 6 of
the socket and check if it is between 5K
and 200K
Is the value
appropriate?
Change the faulty sensor by looking at
the sensor change SUF
To Next Page
Loading...
Need help?
General
