59
M
odel
C
OMBI A 30 MFFI
CE certificate 1312-BP-4084
P
erformance category
*
***
NoX class 5
Category II2H3P
Central Heating input (min/max) kW 9.4 to 30
Central Heating output (min/max) 80°C/60°C kW 9 to 29
Central Heating output (max) 50°C/30°C kW 32
Domestic Hot Water input (max) kW 30
D
omestic Hot Water output (max) kW
2
9
SEDBUK rating / SAP efficiency Band / % A / 90.2
Nominal gas flow rate (15 °C-1013 mbar) min max
Central Heating & DHW flow rate Qn kW 9.4 30
G 20 (NG H -Lacq) 34.02 MJ/m
3
under 20 mbar Vr m
3
/h 0.99 3.17
G 31 (Propane) 46.4 MJ/kg 37 under mbar Vr kg/h 0.73 2.33
Membrane Diameter (mm)/marking
G 20 mm Not Used
G 31 (propane) mm 4.8
Adjustable heating outlet temperature: °C 25 to 85
Central heating minimum flow rate I/h 300
Central heating circuit maximum pressure Pw max bar 2.5
Central heating expansion vessel capacity L 6
Expansion vessel inflation pressure bar 0.7
Adjustable hot water temperature °C 40 to 70
DHW ignition flow rate l/min. 2
DHW specific flow rate (∆T: 30 K) D I/min. 15.0
DHW start minimum pressure Pw min bar 0.5
Maximum pressure of DHW circuit Pw max
bar
10
DHW expansion vessel
L
none
Electric voltage 230 volt, single phase - 50 Hz
Electrical input power W 150
Electrical protection IPX 4D
Fresh air flow rate required for combustion V m
3
h. 36
Mass flow rate for combustion products 13.5
Fume temperature (60-80)
°
C
74
Fume temperature (30-50)
°
C
59
CO2 G20 % 9.2
CO2 G31 % 10
Dimensions Height / Width / Depth (mm) 720 / 390 / 360
Weight kg 40
Flue duct type C13 C33 C43 C53
Maximum Flue Length (Ø 60/100) m
5
Maximum Flue Length (Ø 80/125) m
10
Maximum Flue Length (Ø 80/80) m
60
This appliance is suitable for Natural gas or LPG. A gas conversion must be made by a competent person.
To Next Page
Loading...
Need help?
General