ATCOM A10 User Manual

A10/A11/A10W/A11W IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
38
4.6.2 Update/Auto Provision
Configuration Profile
1. PNP Active: Select “On” or “Off” to enable or disable PNP automatic updates.
2. DHCP Active: Select “On” or “Off” to enable or disable DHCP option automatic updates.
3. Provisioning Server: The address to save control file for auto upgrading, it can filled by http
、https、tftp server、ftp server.For example: tftp://192.168.1.111
4. User Name: The user name to access the file server
5. Password: The password to access the file server
6. Common AES Key: Configures the plaintext AES key for decrypting the Common CFG file.
7. MAC-Oriented AES Key: Configures the plaintext AES key for decrypting the MAC-Oriented
CFG file.
8. Check New Config: If set this parameter as “On”, the phone will do some check for upgrading,
and it will upgrade automatically once the conditions are met
9. Repeatedly: If set this parameter as “On”, the phone will do some check for upgrading after
“Interval(minutes)”，and it will upgrade automatically once the conditions are met
10.Interval(minutes) : This parameter is configurable once the Repeatedly is “On”
11.Weekly: If set this parameter as “On”, the phone will do the check for upgrading at a certain
time in every week
12.Time: The time range that the phone do the check for upgrading every week, and it’s

ATCOM A10 Specifications

General

Brand	ATCOM
Model	A10
Category	IP Phone
Language	English