Instruction Book
9829 2115 69 94
Filters and valves installed between the compressor, the dryer and the air
consumer may need other maintenance activities than those mentioned below
(e.g. draining the filters and replacing the filter elements). Refer to the
appropriate manual for more information
Maintenance activities
Daily
Check PDP temperature.
Service plan A, at least once a year
Replace the cartridges of the silencers.
Replace the filter elements of the optional filters (if installed).
Exchange the dewpoint sensor: certificate is only one year valid. For updating,
contact Atlas Copco customer center.
Twice a year
Check for damaged wiring or loose connections.
Check for air leaks.
Service plan B
Replace the desiccant. In normal working conditions, the lifetime of the desiccant is
approximately 5 years.
It is recommended to have the desiccant replaced by an Atlas Copco service
technician. Replace the cartridges of the silencers.
Replace the filter elements PD/DDp (option).
Exchange the dewpoint sensor: certificate is only one year valid. For updating,
contact Atlas Copco customer center.
7.2 Service Kits
Service kits
Atlas Copco Customer Centers will be glad to provide you with a wide range of service
kits. Service kits are comprises of all parts needed for servicing components and offer the
benefits of genuine Atlas Copco parts while keeping the maintenance budget low. All
service kits are mentioned in the relevant Parts Lists.
To Next Page
Loading...
Need help?
General
