p. 15/46
TLxx-MT-EN-04
The following are the colour conventions in the factory configuration according to the status of the TriLane:
Case Colour Flashing
Power on Red No
Initialisation Blue No
Evacuation Green Yes
Maintenance Orange No
Not used (free) Green No
Forbidden Red No
Controlled pending validation White No
Controlled with authorised passage. Green No
Controlled without right of passage request. Red No
5.5. SPACE PROVIDED FOR READER INTEGRATION
The upper inner part of each leg is available for integration of a reader. A plastic support, fixed on two studs, is available
as an option. Between 175 mm and 210 mm are available in the length direction. If this volume is insufficient, a cut-out in
the closing plate between the leg and the central part is also possible (study available on request).
The other dimensions are shown in the figure below.
Where necessary (to save significant space in the height direction), the reinforcing bar welded to the end of the leg can
be cut.
This reinforcing bar can be
cut out if necessary
Fig. 6 Space available under the TL2 hood for reader integration
To Next Page
Loading...
Need help?
General
