p. 5/46
TLxx-MT-EN-04
TABLE OF ILLUSTRATIONS
Fig. 1 Conventions for direction A and direction B 10
Fig. 2 External dimensions, 2-leg TL2 version 12
Fig. 3 External dimensions, 1-leg TL1 version 12
Fig. 4 Functional pictogram option TL2 14
Fig. 5 Functional pictogram option TL1 14
Fig. 6 Space available under the TL2 hood for reader integration 15
Fig. 7 Space available under the TL1 hood for reader integration 16
Fig. 8 - Main switch 17
Fig. 9- TL2 general dimensions and installation drawing ( plan CH9594) 18
Fig. 10 Fixing points TL1 version 18
Fig. 11 TL1 general dimensions and installation drawing 19
Fig. 12 - Removing the feet (TL2) 20
Fig. 13 - Installing the stainless steel arm 21
Fig. 14 Removing the cover. 23
Fig. 15 Access to the mechanism and electronic board (TL1) 23
Fig. 16 View of the kinematic assembly 24
Fig. 17 View of the locking/unlocking assembly 24
Fig. 18 Anti-noise spacer on the axis of the electro-magnets 25
Fig. 19 View of the centring mechanism 25
Fig. 20 Shock absorber option 26
Fig. 21 Fixed arm turret 26
Fig. 22 Dropping arm device 27
Fig. 23 Motorisation option 28
Fig. 24 TOF camera option on TL2 28
Fig. 25 Other housing options (TL2) 29
Fig. 26 Other housing options (TL1) 29
Fig. 27 Readers option 30
Fig. 28 General overview of the electrical and electronic panels 30
Fig. 29 Overview of the electronic plates (TL1) 31
Fig. 30 Motor control board position on the TL1 31
Fig. 31 Power supply circuit board 32
Fig. 32 Power supply plate on TL1 32
Fig. 33 Control circuit board 33
Fig. 34 Electronic circuit of the functional pictogram 33
Fig. 35 Fixing the dropping arm 38
Fig. 36 Angle sensor 38
Fig. 37 Electro-magnet 39
Fig. 38 Fixing the motor 39
To Next Page
Loading...
Need help?
General
