8 Timer Mode
© Copyright Reserved Autonics Co., Ltd. 55
8 Timer Mode
8.1 Parameter setting
( key: Moves parameters, , key: changes parameter setting value)
Counter/Timer
[C-T]
※COUN: Counter
TIME: Timer
Time range
[HOUR/MIN/ SEC]
● 6-digit model
● 4-digit model
UP/DOWN mode
[U-D]
※UP: Time progresses from ‘0’ to the setting time.
DN: Time progresses from the setting time to ‘0’.
Indication mode
[DSpM]
※Used for the indicator model only.
※It is added that the feature which set the setting time when selecting HOLD
or ONtD.
Memory
protection
[DATA]
※Used for the indicator model only.
※CLR: Reset time value when power is off.
REC: Memorizes time value at the moment of power off.
Output mode
[OUtM]
To Next Page
Loading...
Need help?
General