For your safety
Version: 2.1 ─── 11AS2000
General safety instruc-
tions
In this chapter you will find notes on safety when handling the mo-
tors. They cannot run independently. The motors are therefore re-
garded as incomplete machines. They must be installed in a ma-
chine / plant by the machine manufacturer. The documentation cre-
ated by the machine manufacturer must be read.
Before operation
Keep the surroundings clean
Keep your workplace and the surrounding area clean. Ensure safe
working. Prevent dirt from penetrating into the components.
Secure the control cabinet
When working on machines, secure the control cabinet against inad-
vertent power-up.
Do not use defective motors
Observe the specifications in the technical data during storage,
transport and operation. Do not use damaged motors.
Check safety pictograms
Check whether the designated pictograms are on the product. Re-
place missing or illegible stickers.
Observe tightening torques
Install connections and components in compliance with the specified
tightening torques and check them regularly.
Earth electrical components or modules correctly
Do not touch electrical components or assemblies unless you are
wearing protective ESD clothing. Only walk on conductive floors.
Only use original packaging for further processing
When shipping, transporting, storing and packing, use the original
packaging or conductive materials. Conductive materials are foam
or aluminum, for example.
To Next Page
Loading...
Need help?
General
