Electrical installation
Version: 2.1 ─── 45AS2000
Electrical installation
Connection technology
An overview of the cables and connectors can be found below.
The motors are equipped with permanently mounted power boxes
for the power supply and feedback signals .
Beckhoff supplies prefabricated power and feedback cables. Mating
connectors are not included in the scope of supply. For the selection
of the necessary cables, refer to the Beckhoff documentation for the
connecting cables [+]. In the documentation you will find a complete
overview of the available cables and information on the technical
data.
Cables
Avoid soiling and damage
When connecting the socket and connector, make sure that the
poles and the inside of the component are not soiled or damaged.
Failure to do so may adversely affect the function of the connec-
tions.
For proper application and assembly we recommend:
• Wiring in accordance with applicable regulations and standards
• Pre-assembled and shielded Beckhoff cables
Beckhoff offers pre-assembled cables for faster and flawless instal-
lation of the motors. These cables are tested with regard to the ma-
terial used, shielding and connection type. Perfect functioning and
compliance with legal regulations, such as EMC and UL, are guar-
anteed. The use of other cables can cause unexpected malfunctions
and result in exclusion of warranty.
9.1.2
Rotary joints
Feedback
► Make sure that the poles and the interior of the socket as well as
the threads on the connector are not dirty or damaged
► Push connector 1 straight onto socket 2 on the motor
► Screw thread 3 into the socket
To Next Page
Loading...
Need help?
General
