Transport and storage
Version: 2.1 ─── 37AS2000
Transport and storage
Avoid damage to the motors and resulting loss of warranty
Observe the conditions and the following chapters on transport
and storage.
Failure to observe the conditions may result in damage to the mo-
tors and void the warranty.
Conditions
During transport and storage ensure that the motors and individual
components are not damaged. Observe the specifications in the fol-
lowing chapters and comply with the following conditions:
• Climate category: 2K3 according to EN 60721
• Temperature: -25°C to +65 °C, maximum fluctuation 20K/hour
• Humidity: relative humidity 5% to 95%, no condensation
• Use of suitable means of transport
• The device should be transported and stored in a horizontal po-
sition
• Use of the vendor's original packaging
The table shows the maximum stacking height at which you may
store and transport the motors on a pallet in the original packaging:
Motor Stacking height of the original packag-
ing [qty]
AS2021 5
AS2022 5
AS2023 5
AS2041 3
AS2042 3
AS2043 3
Motor and gear unit Stacking height of the original packag-
ing [qty]
AS2021 with AG2250-+PLE60/WPLE60 3
AS2022 with AG2250-+PLE60/WPLE60 3
AS2023 with AG2250-+PLE60/WPLE60 2
AS2041 with AG2250-+PLE80/WPLE80 2
AS2042 with AG2250-+PLE80/WPLE80 2
AS2043 with AG2250-+PLE80/WPLE80 2
To Next Page
Need help?
General
