25
MODULIZER PRO DSP1224P
from a sequencer or any other MIDI device. Wire and set up the MODULIZERPRO as shown below:
Fig. 3.4: Connecting the MODULIZERPRO via MIDI to a sequencer/computer and a keyboard (option)
3.6 Saving data via MIDI
The MODULIZERPROs MIDI implementation also allows for archiving one or several presets on an external
storage medium. Proceed as follows:
Connect the MIDI OUT jack of the MODULIZERPRO to the MIDI IN jack of a MIDI data recorder (e.g. se-
quencer). Press the STORE and IN/OUT keys simultaneously to enter MIDI mode. Set program change mode
to 0 and controller change mode to 3. Now quit MIDI mode by pressing the STORE key. Use the jog wheel to
select the preset whose data you wish to save. When the preset is activated its parameters are transmitted as
controller data and can be recorded on a sequencer or similar device. Repeat this routine until all presets of
your choice have been sent to the external data recorder.
To load archived data back into the MODULIZERPRO, you must enable controller reception in MIDI mode (see
2.5). Then, start the sequencer to automatically transmit each preset data set back to the MODULIZERPRO.
Press the STORE key, select a program location to store the data and then again press the STORE key. If you
want to automate MIDI store functions you must enable the store mode, to switch on the reception of controller
#28. This allows you to directly store any modification of the actual preset on the preset number that is
transmitted with the controller. You can also restore a complete preset that has previously been recorded with
a MIDI sequencer on the same location it had before.
4. INSTALLATION
Your BEHRINGER MODULIZERPRO was carefully packed in the factory and the packaging was designed to
protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging
and its contents for any signs of physical damage, which may have occurred in transit.
+ If the unit is damaged, please do not return it to us, but notify your dealer and the shipping
company immediately, otherwise claims for damage or replacement may not be granted.
Shipping claims must be made by the consignee.
4. INSTALLATION
To Next Page
Loading...
Need help?
General
