18
TROUBLESHOOTING:
PROBLEM SOLUTION
Food Processor
doesn’t run
• Make sure the bowl and lid are properly aligned and
locked in place and the large food pusher is inserted
in the feed chute.
• Check to make sure the food processor is plugged in.
• If you have a circuit breaker box, be sure the circuit is
closed.
• Unplug the food processor, and then plug it back into
the outlet.
Food processor
not shredding or
slicing properly
• Make sure the disk is installed properly.
• If using the adjustable slicing blade, make sure it is
set to the correct thickness.
• Make sure ingredients are suitable for slicing or
shredding.
If workbowl cover
won’t close
• Make sure the disk is installed correctly.
• Try to close again with the large food pusher
removed.
• Make sure there is no food or other object blocking
the interlock system.
If you are getting
an inconsistent
dice
• Make sure the bowl and lid are properly aligned and
locked in place and the large food pusher is inserted
in the feed chute.
• Ensure there are no clogs in dicing grid, food is
lined up evenly with flat ends, and you are using low
speed.
LED light is
flashing rapidly
• Motor is overheated. Unplug unit and let cool down
for at least 20 minutes before use.
If the problem is not due to one of the above items, see the “Warranty
and Service” section of this Use and Care Manual. Do not return the Food
processor to the retailer. Retailers do not provide service.
To Next Page
Loading...
Need help?
General
