6
GETTING STARTED
• Remove all packing material, any stickers, and the plastic band around
the power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
• CAUTION: Handle blades and disks very carefully. They are very sharp.
• Select a level dry countertop where the appliance is to be used allowing
air space on all sides to provide proper ventilation for the motor.
HOW TO USE
This product is for household use only.
USING YOUR FOOD PROCESSOR
1. Determine whether you will be using the S Blade, the Dough Blade, the
Dicing Disk, the Shredding Disk, the Slicing Disk or the mini S Blade.
DICING
DISK
SLICING
DISK
S BLADE
MINI S
BLADE
DOUGH
BLADE
SHREDDING
DISK
DICE
¼” x ¼”
SLICE
(variable
thickness
1-5mm)
CHOP,
PUREE, MIX
CHOP,
PUREE,
MIX (small
quantities)
KNEAD, MIX
SHRED,
GR ATE
LOW SPEED
MEDIUM
SPEED
HIGH SPEED
OR PULSE
HIGH
SPEED OR
PULSE
LOW SPEED
MEDIUM
SPEED
Important: Always make sure your food processor is
unplugged and placed on a flat, level surface before
starting to assemble.
2. Place the workbowl on the base, with the handle
facing forward at a 45 degree angle to the right.
3. Hold the bowl in place by the handle. Turn the
workbowl counterclockwise, pushing the handle
away from you to lock it on the base. You will hear
it click when it is securely attached. (A)
A
To Next Page
Loading...
Need help?
General
