Black & Decker Performance FP6000 User Manual

8
USING THE SPEED CONTROLS
Note: If the food processor does not run, make sure the
workbowl and lid are properly locked on the base and the
large food pusher is fully in place. There is an automatic
safety lock that causes the food processor to stop working
if the large food pusher pops out and/or the lid and
workbowl are not properly locked in place.
ADJUSTABLE SPEED DIAL
The controls are located on the front of the base. This food
processor uses an adjustable speed dial to control the
processing speed. (E) The lowest speed is when the dial
is turned all the way to the left (counterclockwise.) The
highest speed is when the dial is turned all the way to the
right (clockwise.) The adjustable speed dial allows you full
control of your food processor. The following speed chart
contains recommendations for speeds and functions.
1. Plug in the appliance to turn it on.
2. Press the toggle upwards towards START|OFF to
start the food processor. (F)
3. Turn the speed dial clockwise to increase speed and
counterclockwise to decrease speed.
4. To pulse, press and release the toggle downwards
towards PULSE. (G)
5. Press toggle upwards towards START|OFF to stop
the food processor. (F)
6. Always unplug the appliance when not in use.
LOW MEDIUM HIGH
Mixing Dough and Dicing
Slicing and Shredding
Chopping, Mixing, and
Pureeing
Vegetables including
• potatoes
• onions
• cucumbers
Fruit
Dough
Place dry ingredients
into workbowl and add
liquids, with the food
processor running,
through the feed tube.
Vegetables including
• potatoes
• onions
• cucumbers
• cabbage
• carrots
Fruit
Cheese
(freeze 20 min. prior)
Chocolate
Vegetables
Fruit
Fresh herbs
Nuts
Bread crumbs
Meat
Sauces
Batters
Dips
E
F
G

Black & Decker Performance FP6000 Specifications

General

Brand	Black & Decker
Model	Performance FP6000
Category	Food Processor
Language	English