Brake system
Checking function of
brakes
Pull the right brake lever.
The pressure point must be
clearly perceptible.
Pull the left brake lever.
The pressure point must be
clearly perceptible.
To test the parking brake, ex-
tend the side stand and try to
push the Maxi-Scooter forward
and back.
The Maxi-Scooter must refuse
to move.
If a clear pressure point is not
perceptible or if the Maxi-Scooter
can be pushed in either direction:
Have the brakes checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking front brake pad
thickness
Make sure the ground is level
and firm and place the Maxi-
Scooter on its stand.
Visually inspect the brake pads
to ascertain their thickness.
Viewing direction: on left and
right between wheel and front
suspension toward brake
pads 1.
Brake-pad wear limit,
front
min 1.0 mm (Friction pad only,
without backing plate. The
wear indicators (grooves) must
be clearly visible.)
8
102
z
Maintenance
https://www.motorcycle-manual.com/
To Next Page
Loading...
Need help?
General
