water and BMW plastic care
emulsion.
Chrome
Carefully clean chrome sections
with a generous amount of water
and motorcycle cleaner from the
care series BMW Motorrad Care
Products. This applies especially
where road salt has been in use.
For an additional treatment, use
BMW Motorrad metal polish.
Radiator
Clean the radiator regularly to
prevent overheating of the en-
gine due to inadequate cooling.
For example, use a garden hose
with low water pressure.
ATTENTION
Bending of radiator fins
Damage to radiator fins
Take care not to bend the radi-
ator fins when cleaning.
Rubber
Treat rubber components with
water or BMW rubber-care
products.
ATTENTION
Application of silicone sprays
to rubber seals
Damage to the rubber seals
Do not use silicone sprays
or care products that contain
silicon.
Care of paintwork
The long-term effects of mater-
ials that are damaging to paint
can be prevented by regular
vehicle washes, particularly if
your vehicle is ridden in areas
susceptible to high levels of air
pollution or natural contamination,
for example tree resin or pollen.
Particularly aggressive materials,
however, should be removed
immediately, otherwise changes
to or discolouration of the paint
can result. These include, for
example, spilled fuel, oil, grease,
brake fluid or bird excrement.
For this, we recommend
BMW Motorrad solvent cleaner
followed by BMW Motorrad gloss
polish for preservation.
Contamination of the paint
surface can be seen particularly
clearly after a vehicle wash.
These areas should be cleaned
immediately using benzine or
spirit, applied with a clean cloth
or cotton pad. BMW Motorrad
recommends that tar spots
be removed using BMW tar
remover. The paint should then
be preserved in these areas.
Vehicle preservation
If water no longer rolls off the
paint, the paint must be pre-
served.
For paint preservation,
BMW Motorrad recommends
10
140
z
Care
https://www.motorcycle-manual.com/
To Next Page
Loading...
Need help?
General
