In the dark or in tunnels: Press
button 1 again to switch off the
daytime riding light and switch
on the low-beam headlight and
the front side lights.
NOTICE
If the high-beam headlight is
switched on while the daytime
riding light is on, the daytime
riding light is switched off after
approx. 2 seconds and the
high-beam headlight, low-beam
headlight and front side light are
switched on.
If the high beam headlight is
switched off again, the daytime
running light is not automat-
ically reactivated, but must be
switched on again if required.
Hazard warning lights
system
Operating hazard warning
flashers
Switch on the ignition.
NOTICE
The hazard warning flashers
place a strain on the battery.
Do not use the hazard warning
flashers for longer than absolutely
necessary.
NOTICE
The indicator function replaces
the hazard warning lights func-
tion while the indicator button is
pressed once operating readi-
ness is switched on. The hazard
warning lights function becomes
active again once the indicator
button is released.
Press button 1 to switch on
the hazard warning flashers.
Ignition can be switched off.
Switch on the ignition and
press button 1 again to switch
off the hazard warning flashers.
Turn indicators
Operating the turn
indicators
Switch on the ignition.
4
52
z
Operation
https://www.motorcycle-manual.com/
To Next Page
Loading...
Need help?
General
