Everything under control
62
Settings and information
Operating principle
1 Button for:
> Display selection
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 59
3 When the lights are switched on: instrument
lighting brightness 83
4 Calling up Check Control 67
5 Checking engine oil level 187
6 Setting the clock 65
7 Adjusting the date 66
8 Viewing Next Service indicator 63
Exiting displays
The outside-temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
You can set units of measure.
Setting the units of measure
You can change the units of measurement for
fuel consumption, distance, temperature and
pressure.
Online Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AG
To Next Page
Loading...
