▷ Each time the rocker switch is pressed to the
point of resistance, the desired speed in‐
creases or decreases by approx.
1 mph/1 km/h.
▷ Each time the rocker switch is pressed past
the point of resistance, the desired speed in‐
creases or decreases by a maximum of
5 mph/10 km/h.
The maximum speed that can be set de‐
pends on the vehicle.
▷ Pressing the rocker switch to the resistance
point and holding it accelerates or deceler‐
ates the vehicle without requiring pressure on
the accelerator pedal.
After the rocker switch is released, the vehi‐
cle maintains its final speed. Pressing the
switch beyond the resistance point causes
the vehicle to accelerate more rapidly.
Continuing cruise control
General information
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, uninten‐
tional braking or accelerating may occur.
In the following cases, the stored speed value is
deleted and cannot be called up again:
▷ When the system is switched off.
▷ When the ignition is switched off.
Calling up the stored speed
Press the button on the steering wheel.
The stored speed is reached again and main‐
tained.
Displays in the instrument
cluster
Indicator light
Depending on how the vehicle is equip‐
ped, the indicator light in the instrument
cluster indicates whether the system is
switched on.
Desired speed and stored speed
▷ Marking lights up green: sys‐
tem is active, the marking indi‐
cates the desired speed.
▷ Marking lights up orange: sys‐
tem is interrupted, the marking
indicates the stored speed.
▷ The marking does not light up: the system is
switched off.
Status display
Selected desired speed.
If no speed is indicated, it is possible that the
conditions necessary for operation are not cur‐
rently fulfilled.
System limits
Engine power
The desired speed is also maintained downhill,
but may not be maintained on uphill grades if en‐
gine power is insufficient.
PDC Park Distance Control
Concept
PDC is a support when parking. The system de‐
tects objects behind the vehicle. If the vehicle is
equipped with front PDC, objects in front of the
vehicle are detected too. Objects that you are
Seite 165
Driving comfort
CONTROLS
165
Online Edition for Part no. 01402720665 - II/19
To Next Page
Loading...
Need help?
General
