For rolling or pushing the vehicle, refer to
page 115.
Tow truck
The vehicle should only be transported on a
loading platform.
NOTICE
The vehicle can become damaged when lifting
and securing it.
There is a risk of damage to property.
▷ Lift the vehicle using suitable means.
▷ Do not lift or secure the vehicle by its tow
fitting, body parts, or suspension parts.
Towing other vehicles
General information
Switch on the hazard warning system, depend‐
ing on local regulations.
If the electrical system has failed, clearly identify
the vehicle being towed by placing a sign or a
warning triangle in the rear window.
Safety information
Warning
If the approved gross vehicle weight of the tow‐
ing vehicle is lighter than the vehicle to be
towed, the tow fitting can tear off or it will not
be possible to control the vehicle's response.
There is a risk of accident. Make sure that the
gross vehicle weight of the towing vehicle is
heavier than the vehicle to be towed.
NOTICE
If the tow bar or tow rope is attached incor‐
rectly, damage to other vehicle parts can occur.
There is a risk of damage to property. Correctly
attach the tow bar or tow rope to the tow fitting.
Tow bar
The tow fittings used should be on the same
side on both vehicles.
Should it prove impossible to avoid mounting the
tow bar at an offset angle, please follow the fol‐
lowing:
▷ Maneuvering capability is limited going
around corners.
▷ The tow bar will generate lateral forces if it is
secured with an offset.
Tow rope
When starting to tow the vehicle, make sure that
the tow rope is taut.
Use nylon ropes or straps, which will enable the
vehicle to be towed without jerking.
Tow fitting
General information
The screw-in tow fitting should always be carried
in the vehicle.
Seite 251
Breakdown assistance
MOBILITY
251
Online Edition for Part no. 01402720665 - II/19
To Next Page
Loading...
Need help?
General
