There is an additional guest profile available that
is not assigned to any remote control. It can be
used to apply settings in the vehicle without
changing the personal driver profiles.
Functional requirements
For the system to be able to identify the driver
profile associated to a particular driver, the de‐
tected remote control must be clearly allocated
to the driver.
This is the case when:
▷ The driver is only carrying his or her own re‐
mote control.
▷ The driver unlocks the vehicle.
▷ The driver gets into the vehicle through the
driver's door.
Adjusting
The settings for the following systems and func‐
tions are stored in the active profile. The scope
of storable settings depends on country and
equipment.
▷ Unlocking and locking.
▷ Lights.
▷ Climate control.
▷ Radio.
▷ Instrument cluster.
▷ Programmable memory buttons.
▷ Volumes, tone.
▷ Control Display.
▷ Navigation.
▷ TV.
▷ PDC Park Distance Control.
▷ Rearview camera.
▷ Seat position, exterior mirror position, steer‐
ing wheel position where applicable.
Both the positions saved via the seat memory
and the last position set are saved.
▷ Intelligent Safety.
Profile management
Selecting a driver profile
Regardless of the remote control in use, a differ‐
ent driver profile may be activated. This allows
you to call up personal vehicle settings, even if
you did not unlock the vehicle with your own re‐
mote control.
Via iDrive:
1. "My Vehicle"
2. "Driver profiles"
3. Select driver profile.
4. "OK"
▷ All settings stored in the selected driver pro‐
file are automatically applied.
▷ The called-up driver profile is assigned to the
remote control being used at the time.
▷ If the driver profile is already assigned to a dif‐
ferent remote control, this driver profile will
apply to both remote controls.
Using a guest profile
The guest profile is for individual settings that are
stored in none of the three personal driver pro‐
files.
Via iDrive:
1.
"My Vehicle"
2. "Driver profiles"
3. "Drive off (guest)"
4. "OK"
The guest profile cannot be renamed. It is not
assigned to the current remote control.
Renaming a driver profile
A personal name can be assigned to the active
driver profile to avoid confusion between the
driver profiles.
Seite 77
Opening and closing
CONTROLS
77
Online Edition for Part no. 01402720665 - II/19
To Next Page
Loading...
Need help?
General
