Wheels
Tire recommendation
For every size of tire,
BMW Motorrad has tested and
approved certain makes as
roadworthy. BMW Motorrad
cannot evaluate the suitability of
other tires, and can therefore
take no responsibility for their
driving safety.
BMW Motorrad recommends
only using the tires tested and
approved by BMW Motorrad.
Detailed information can be
obtained from your authorized
BMW Motorrad retailer or online
at www.bmw-motorrad.com.
Affect of wheel sizes
on suspension control
systems
The wheel sizes play a major role
in the ABS and ASC suspension-
control systems. The diameter
and width of the wheels stored
in the control unit have particular
significance as the basis for all
necessary calculations. A change
in these sizes resulting from con-
version to wheels not installed
as standard equipment can seri-
ously affect the control efficiency
of these systems.
The sensor rings required for
wheel speed detection must also
match the installed control sys-
tems and may not be replaced.
If you want to equip your
motorcycle with different wheels,
please contact a specialist
service facility, preferably a
BMW Motorrad retailer. In some
cases the data stored in the
control units can be adapted for
the new wheel sizes.
TPC sticker
with Tire Pressure Control
(TPC)
OE
ATTENTION
Improper tire removal.
Damage to the TPC sensors.
Inform a specialist service
facility or an authorized
BMW Motorrad retailer on the
fact that the wheel is equipped
with a TPC sensor.
On motorcycles equipped with
TPC, there is a sticker on the
wheel near to the position of the
TPC sensor. When changing the
tire, it is important to take care
not to damage the TPC sen-
sor. Draw the attention of the
7
127
z
Maintenance
ProCarManuals.com
To Next Page
Loading...
Need help?
General
