Ending a call
▷ Via iDrive:
"End call"
▷
/
Press the corresponding button on the steer‐
ing wheel.
Ring tone
Depending on the mobile phone, the phone ring
tone for an incoming call can be selected.
1. "CAR"
2. "Settings"
3. "General settings"
4. "Mobile devices"
5. Select the desired mobile phone.
6. "Use device ringtone"
Last calls
The last outgoing, missed, and incoming calls
are transferred to the vehicle. Depending on the
equipment, the calls are transmitted from the
main phone and additional telephones.
Displays
1.
"COM"
2. If necessary, "Telephone"
3. "Recent calls"
The last calls are displayed.
Filtering call list
1.
"COM"
2. "Telephone"
3. Select desired filter:
▷ "All telephones"
With two paired phones, select the de‐
sired phone.
▷ "All calls"
▷ "Missed calls"
▷ "Incoming calls"
▷ "Outgoing calls"
4. Select the desired setting.
Selecting number from list
Select the desired number from the list:
Call is established via the mobile phone, from
where the entry originates.
Via Options:
Start call via the second mobile phone.
To cancel: "End call"
Active calls
Adjusting the volume
Turn the volume button on the radio during the
call, until the desired volume is reached.
Volume settings
The microphone volume of the phone can be ad‐
justed during an active call.
1.
"Microphone sensitivity"
2. Set the desired volume.
Call transfer
The relaying of an incoming call is handled
through the end-user device with which the call
was accepted, for instance with the button on
the steering wheel via the hands-free system of
the car.
The top priority must be assigned to the tele‐
phone.
An ongoing call can be transferred between the
vehicle and the end device:
▷ "Transfer call to vehicle"
▷ "Transfer call to telephone"
Additional information:
Managing mobile devices, see Owner's Manual
for the vehicle.
Seite 65
Telephone
COMMUNICATION
65
Online Edition for Part no. 01405A39127 - VI/21
To Next Page
Loading...
Need help?
General
