DIVAR 2000 / DIVAR 3000 / DIVAR
Archive Player operation | en 69
5000
Open an archive file
After starting the player, check the relevant directory to locate your archive files (identified by
file extensions .mpg, .mp4, .dav, .264, .dev, .asf).
These files can be opened and played in 2 ways:
– Using the Open button on the player - you will be asked to browse and select the file(s)
to be played on the Player
– Use the mouse to drag an archived file onto the player (you can also drag a batch of files
to store them in the player memory; the last file that is dragged onto the player is
automatically started in play mode)
Player control
As the record file is playing use the player interface buttons to further control the play status
of the archived files. Another control possibility is to scroll your mouse over an active channel
screen to activate four separate buttons in the top of the screen – see following figure.
These buttons have the following functions:
Show file resolution and frame rate
Zoom in on a segment of the screen (press the button and then select the desired
region by drawing a rectangle with your mouse on the screen; if required, press the
button again and then scroll the zoomed image with your mouse; when finished,
right-click the mouse to exit the zoomed area
When playing the video file, click to save current video frame as an image file to a
specified directory (assigned in Config > Snap Path)
Close the file that is currently playing
See also
– Authentication (checking watermark), page 69
– Configuration, page 70
8.2 Authentication (checking watermark)
Use <Authentication> to check the authenticity of individual frames:
1. Click the Open file icon and browse through the relevant directories to choose a record
(file) to check.
2. Select the check box beside the file (if not already selected).
3. Click <Start Check> to check if the record has been modified or not.
– The file is displayed in the right column
– A progress percentage is displayed during the check
– If required, press <Stop Check> to halt the check
4. Upon completion:
– If the record is original, the word Original is displayed in the Results column
– If the record is false, a warning message is displayed
8.3 Export file
Export a file as follows:
1. Choose
and open a file to be exported.
Bosch Security Systems Operation Manual 2016.09 | v1.0 | AM18-Q0717
To Next Page
Loading...
Need help?
General
Weight and Dimensions
