Installation
pro.Bose.com
Installation Guide - 35
System Setup
This section provides instructions on adjusting system setting for preferred operation. To make these settings, the system must be
connected to power and the POWER switch set to ON.
Figure 31. Rear connection panel
Figure 32. Front control panel with compartment closed
POWER switch
AC power cord jack
POWER LED
Note: When the system is unplugged, or if a power loss occurs, these system settings are retained in flash memory. However,
continuous system operation during a power loss requires the use of an optional backup power source.
System Setup Procedure
When the unit is on, the POWER LED lights. Opening the front control compartment gives you access to the LCD and control but-
tons. The LCD displays the product model name at startup.
Figure 33. Front control compartment
Arrow buttons
SELECT button
• If the system is locked, simultaneously press the left and right arrow buttons and hold for five seconds. Lockout O appears.
• When the system is unlocked, you can navigate to system setup options.
• Use the SELECT button to activate a menu option and to confirm a new setting.
• Use the arrow buttons to the right of the LCD to move forward, back, up, and down through menus.
To Next Page
Loading...
Need help?
General