Vercise™ DBS Remote Control 3 Directions for Use
Vercise™ DBS Remote Control 3 Directions for Use
92104389-01 2 of 27
Remote Control Features
1. Screen: displays all menus, icons, and messages.
2. Lock/Unlock Button : unlocks the Remote
Control from sleep mode.
3. Programs Button : displays the Programs menu.
4. Home Button : displays the Home screen.
5. Stimulation Button : Turns stimulation ON or
OFF.
6. Minus Button : Decreases selected
parameter.
7. Plus Button : Increases selected parameter .
8, 9. Navigation Buttons and : allow
scrolling through a selected menu.
10, 11. Navigation Buttons and : make a
selection.
12. Navigation Button : returns to the previous
screen.
13. USB Port (not shown): allows recharging of the
Remote Control with the USB power supply.
The Remote Control has an average communication range of 22 inches (55.9 cm) with the non-
rechargeable Vercise
TM
PC Stimulator and an average communication range of 36 inches (91.4cm) with
the rechargeable Vercise Gevia
TM
Stimulator. When using the Remote Control, avoid common sources
of interference, such as televisions and computer monitors. For additional telemetry information, see
the Telemetry Help section.
Basic Operation
Unlocking the Remote control
The Remote Control goes into idle (or sleep) mode when not in use. It can be reactivated by pressing
the Lock/Unlock button on the right side of the Remote Control.
To Next Page
Loading...
Need help?
General
