Boston Scientific Vercise DBS Remote Control 3 Directions For Use

Accessing Additional Options from the Main Menu
Vercise™ DBS Remote Control 3 Directions for Use
92104389-01 5 of 27
Program Selection and Activation
A stimulation program is a set of stimulation parameters that determine the patient’s therapy. A program
may apply stimulation to as many as four independent stimulation elds or areas, depending on how
the program is set up. For example, one area may correspond to a right brain target, while another area
may correspond to a left brain target. The Remote Control can store up to four programs – numbered 1
through 4 – for the patient to select and activate at any time.
1. Press the button on the left side of the Remote Control to display the Programs screen.
Note: You can also navigate to the Programs menu from the Main Menu. Refer to the Accessing the
Main Menu section for additional instructions.
2. Select Change Program.
3. Press the Up or Down Arrow buttons to navigate to the desired program.
4. Press the Right Arrow button to select the program.

Boston Scientific Vercise DBS Remote Control 3 Specifications

General

Brand	Boston Scientific
Model	Vercise DBS Remote Control 3
Category	Medical Equipment
Language	English