24
Touch the LCD screen, or a key, with your finger or the
included touch pen to select a machine function.
■ Pattern type selection screen
* The keys in the table above appear and can be used
in most of the screens described later in this manual.
LCD SCREEN
• Only touch the screen with your finger or the
touch pen included with the machine. Do not
use a mechanical pencil, screwdriver or any
other hard or sharp object. In addition, do not
touch the screen with extreme pressure.
Otherwise the screen may be damaged.
• All or part of the screen may sometimes
become darker or lighter due to changes in the
surrounding temperature or other changes in
the environment. This is not a sign of a
malfunction. If the screen is difficult to read,
adjust its brightness.
No.
Display
Function Page
Key Name
1 Cancel all operations
previously performed and
return to the initial pattern
type selection screen.
–
Home key
2 – This area displays the
selected pattern.
109
Pattern
display area
3 – Shows the available
embroidering area for the
attached embroidery frame.
The embroidery frame
indications, the grid lines
and other display settings
can be specified from the
machine settings screen.
109
Embroidering
area line
4 Change the machine
settings.
25
Settings key
5 Check a machine
operation.
29
Machine
operations
guide key
6 Move or thread a selected
needle bar, to position the
carriage, or to oil the
machine so the embroidery
frame can easily be
removed or attached.
67, 81
Needle bar/
Frame move
key
7 Set the clock to your local
time.
23
Clock key
8 Specify the wireless LAN
settings. Also, this key
shows the machine’s
wireless LAN signal
strength.
If there is a new update file,
the key appears as .
27, 158
Wireless LAN
key
No.
Display
Function Page
Key Name
To Next Page
Loading...
Need help?
General
