Brother 884-T23 User Manual

72
■ In the [Manual Color Sequence] mode
Automatic lock stitch setting
When the machine is purchased, it is set to automatically
embroider lock stitches at the beginning of the pattern, before
embroidering after each thread color change, and before
trimming the thread.
■ To change the lock stitches being embroidered
at the beginning of the pattern, at the
beginning of embroidering each thread color
change and at the beginning of embroidering
after the thread trim.
a
Make sure that the lock stitching (beginning) key
appears as .
• Each touch of the key turns the setting either on or off.
■ To change the lock stitches being embroidered
before the thread is trimmed.
a
Make sure that the lock stitching (end) key appears as
.
• Each touch of the key turns the setting either on or off.
No.
Display
Function Page
Key Name
1
This icon appears when the
machine is in the [Manual
Color Sequence] mode.
60
Manual color
sequence
mode icon
2
Change the needle bar color
setting.
This key appears when you
set [Manual Color Sequence]
to [ON] in settings screen.
60
Manual color
sequence key
1
2
Memo
• Automatic lock stitching cannot be applied to
patterns whose jump stitches will not be trimmed
(). (page49)
Automatic lock
stitch setting turned
on
Automatic lock
stitch setting turned
off
Memo
• If the first stitch length is less than 0.8 mm (1/32
inch), the lock stitch won’t be inserted.
Automatic lock
stitch setting turned
on
Automatic lock
stitch setting turned
off
Memo
• The automatic lock stitch setting stays the same
until the key is touched again. The setting specified
before the machine is turned off remains selected
the next time that the machine is turned on.

Brother 884-T23 Specifications

General

Brand	Brother
Model	884-T23
Category	Sewing Machine
Language	English