USING THE DCP AS A PRINTER 6 - 2
How to print your document
When the DCP receives data from your computer, it begins printing
by picking up paper from the paper tray. The paper tray can feed
many types of paper and envelopes.
1
From your computer select the Print command.
If your computer is also connected to any other printers, select
Brother DCP-8040 or DCP-8045D (USB) Printer as your
printer driver from the Print or Print Settings menu in your
software application, and then click on OK to begin printing.
2
Your computer sends a print command and data to the DCP.
3
The LED blinks in yellow and the DCP starts to print.
If your application software does not support your custom paper size,
select the next largest paper size.
Then adjust the print area by changing the right and left margins in
your application software.
You can select the paper size, and orientation in your
application software.
To Next Page
Loading...
Need help?
General
