Brother IntelliFax-2840 User Manual

Troubleshooting
101
B
Machine Information B
Checking the Serial Number B
You can see the machine’s Serial Number on
the LCD.
a Press Menu, 5, 1.
Machine Info.
1.Serial No.
b The machine will display the machine’s
Serial Number on the LCD.
c Press Stop/Exit.
Reset functions B
The following reset functions are available:
1 Address & Fax
Address & Fax resets the following
settings:
 Address Book
(One Touch Dial/Speed Dial/Setup
Groups)
 Programmed fax jobs in the memory
(Polled TX, Delayed Fax)
 Station ID
(name and number)
 Coverpage Msg
(comments)
 Remote Fax Options
(Remote Access Code, Fax Storage,
Fax Forwarding, Paging and PC-Fax
1
)
 Report settings
(Transmission Verification Report/
Tel Index List/Fax Journal)
 Setting Lock password
1
For MFC-7240
2 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Note
Unplug the interface cable before you
choose All Settings.

Brother IntelliFax-2840 Specifications

General

Print Technology	Laser
Fax Modem Speed	33.6 Kbps
Standard Memory	16 MB
Paper Capacity	250 sheets
Maximum Fax Resolution	203 x 392 dpi
Memory Transmission	Yes
Out-of-Paper Reception	Up to 400 pages
Print Resolution	2400 x 600 dpi
Copier Function	Yes
Copy Resolution	600 x 600 dpi
Telephone Handset	No
Caller ID	Yes
Fax Forwarding	Yes
Reduction/Enlargement	50% to 200%
Broadcasting	272 locations
Transmission Speed	Approximately 2.5 seconds per page
Copy Speed	21 cpm (copies per minute)
Print Speed	21 ppm (pages per minute)