Brother IntelliFax-2840 User Manual

45
9
9
How to copy 9
The following steps show the basic copy
operation. For details about each option, see
Advanced User’s Guide on the CD-ROM.
a When you want to make a copy, press
(COPY) to illuminate it in green.
 Make sure you are in COPY mode.
 The LCD shows:
Note
The default setting is FAX mode. You can
change the amount of time that the
machine stays in COPY mode after the
last copy operation. (See Advanced
User’s Guide: Mode Timer.)
b Place the document face down in the
ADF. (See Using the automatic
document feeder (ADF) uu page 22.)
c Press Start.
Stop copying 9
To stop copying, press Stop/Exit.
Copy settings 9
Press the temporary COPY key Options.
For details about changing the following copy
settings and how to make two-sided copies,
see Advanced User’s Guide: Copy settings.
You can change the following copy settings:
 Quality
 Stack/Sort
 Brightness
 Contrast
 Enlarge/Reduce
 Page Layout
 Manual Duplex (2-sided)
Making copies 9
Stack Copies:01
100%
□□■□□ Auto

Brother IntelliFax-2840 Specifications

General

Print Technology	Laser
Fax Modem Speed	33.6 Kbps
Standard Memory	16 MB
Paper Capacity	250 sheets
Maximum Fax Resolution	203 x 392 dpi
Memory Transmission	Yes
Out-of-Paper Reception	Up to 400 pages
Print Resolution	2400 x 600 dpi
Copier Function	Yes
Copy Resolution	600 x 600 dpi
Telephone Handset	No
Caller ID	Yes
Fax Forwarding	Yes
Reduction/Enlargement	50% to 200%
Broadcasting	272 locations
Transmission Speed	Approximately 2.5 seconds per page
Copy Speed	21 cpm (copies per minute)
Print Speed	21 ppm (pages per minute)