Brother IntelliFax-2840 User Manual

31
6
6
Note
(FAX-2940 only)
You can download PC-FAX Send
software from the Brother Solutions
Center at http://solutions.brother.com/.
PC-Fax Receive
(For Windows
®
only) 6
If you turn on the PC-Fax Receive feature
your machine will store received faxes in
memory and send them to your PC
automatically. You can then use your PC to
view and store these faxes.
Even if you have turned off your PC (at night
or the weekend, for example), your machine
will receive and store your faxes in its
memory. The LCD will show the number of
stored faxes received, for example: PC Fax
Msg:001.
When you start your PC and the PC-Fax
Receiving software runs, your machine
transfers your faxes to your PC automatically.
To transfer the received faxes to your PC you
must have the PC-FAX Receiving software
running on your PC. (For details, see
Software User’s Guide: PC-FAX receiving.)
a Press Menu, 2, 5, 1.
b Press a or b to choose PC Fax
Receive.
Press OK.
c The LCD shows a reminder to start the
PC-FAX Receive program on your
computer. If you have started the PC-
FAX Receive program, press OK. If you
have not started the PC-FAX Receive
program, see Software User’s Guide:
PC-FAX receiving.
d Press a or b to choose On or Off.
Backup Print
Off
Press OK.
e Press Stop/Exit.
Important
If you choose Backup Print On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case if there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
The faxes stored in the machine’s memory
will be deleted.
Note
• Before you can set up PC-Fax Receive
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For details,
see Software User’s Guide: PC-FAX
receiving.)
• If your machine has a problem and is
unable to print faxes in memory, you can
use this setting to transfer your faxes to a
PC. (For details, see Transferring your
faxes or Fax Journal report uu page 74.)
• PC-Fax Receive is not supported in Mac
OS.
Using PC-FAX (For MFC-7240) 6

Brother IntelliFax-2840 Specifications

General

Print Technology	Laser
Fax Modem Speed	33.6 Kbps
Standard Memory	16 MB
Paper Capacity	250 sheets
Maximum Fax Resolution	203 x 392 dpi
Memory Transmission	Yes
Out-of-Paper Reception	Up to 400 pages
Print Resolution	2400 x 600 dpi
Copier Function	Yes
Copy Resolution	600 x 600 dpi
Telephone Handset	No
Caller ID	Yes
Fax Forwarding	Yes
Reduction/Enlargement	50% to 200%
Broadcasting	272 locations
Transmission Speed	Approximately 2.5 seconds per page
Copy Speed	21 cpm (copies per minute)
Print Speed	21 ppm (pages per minute)